Dimethyl sulfoxide (DMSO)

Dimethyl sulfoxide: polar aprotic solvent.

Dimethyl sulfoxide testing at Vanguard Laboratory: identity, purity and quantity $250 per sample, with results in 3 to 5 business days.

Structure

2D structure of Dimethyl sulfoxide

Dimethyl sulfoxide: 2D structure drawn from the PubChem record (CID 679).

Compound data

CAS number

67-68-5

Formula

C2H6OS

Molecular weight

78.13 g/mol

Type

Polar aprotic solvent

Structure and names

Identity: Dimethyl sulfoxide

IUPAC name: methylsulfinylmethane

How Vanguard tests Dimethyl sulfoxide

Method for the $250 identity, purity and quantity test: Chromatographic assay, with detection selected for the compound, against a reference standard, with results in 3 to 5 business days.

The USP monograph covers identity by infrared spectroscopy and chromatographic retention time, organic impurities by chromatography, nonvolatile residue, an assay calculated from those results, specific gravity, refractive index, acidity by titration, water and UV absorbance. Full testing to the USP Dimethyl Sulfoxide monograph is available and quoted.

What's reported

  • Purity, as percent of total peak area
  • Quantity, against the label claim
  • Identity, reported as match or no match against the reference standard
  • With monograph testing (quoted): the monograph’s tests against its limits

Tests and prices

$250

Chromatographic purity and mg per unit by the method matched to the compound, identity against a reference standard. 1 unit.

$200

Chromatographic purity on bulk powder. 50 mg.

Add-on tests

Add-on testPrice
Identity and impurities
FTIR identity$90
CHNS elemental analysis (carbon, hydrogen, nitrogen, sulfur)$125
Chiral purity (where a chiral method exists; new methods quoted)$250
Water, solvents and salt form
Water content by Karl Fischer$60
Residual solvents$150
Counterions: chloride, acetate and TFA$70
Assay
Assay, % w/w (with raw powder purity; $250 together)+$50
Metals and conformity
Heavy metals: arsenic, cadmium, chromium, mercury and lead$150
Conformity: purity and quantity on more units from the same lot$100 per extra unit
Microbiology (injectables)
Endotoxin$210
Sterility or bioburden$150
Container closure integrity (CCI)$50
Screening
Fentanyl screen$50

10% off for 10 or more samples.

Need something else? Other tests are available on request.

Sample amount and turnaround

Purity and quantity is $250 per sample (1 unit) and raw powder purity is $200 for 50 mg, with results in 3 to 5 business days. Send the material sealed and labeled, with the label claim and the form it contains.

Salts, forms and compendial references

  • Dimethyl Sulfoxide (CAS 67-68-5)
  • Tell us the salt or form the label states, so quantity is reported on the same basis.

Questions about Dimethyl sulfoxide testing

Is the $250 test the same as USP monograph testing?

No. The $250 test covers identity, purity and quantity by a chromatographic assay, with detection selected for the compound. Full testing to the USP Dimethyl Sulfoxide monograph is available and quoted.

Why is DMSO hard to detect by UV?

DMSO is a small, volatile liquid with little UV absorbance, so the lab uses a detection method suited to the compound. The USP sets the assay as what remains after impurities and nonvolatile residue are subtracted.

What impurities can DMSO contain?

Dimethyl sulfone and dimethyl sulfide are common, along with water, since DMSO takes up moisture from air. The chromatographic test separates the organic impurities, and water is measured separately.

Does DMSO need special handling?

DMSO freezes near room temperature and absorbs water quickly, so samples should be sent in tightly closed glass. Some plastics leach into DMSO and can show up as extra peaks.

Sources

https://pubchem.ncbi.nlm.nih.gov/compound/679

Identity facts from the USP monograph header for this compound.

Order

Start an order online, or send the compound name and the tests you need for a quote.